They installed fibre optic Internet in my neighbourhood a while back, and this is what the cable ducts look like. Also interesting to see how these get installed, with a sort of huge needle/drill on tracks.

  • saltesc@lemmy.world
    link
    fedilink
    arrow-up
    22
    ·
    1 year ago

    Meanwhile, OP’s neighbourhood has no internet now.

    Thanks for doing what we were all curious about!

  • Flagpole2465@lemmy.world
    link
    fedilink
    arrow-up
    10
    arrow-down
    1
    ·
    edit-2
    1 year ago

    Thats most likely “future path” from a company called Duraline. There should be a rip cord just like a cat5e cable.

    They won’t use all runs at once, hence the name future path.

    Edit: I just assumed this was in the US, however this is made worldwide.

  • Goatastic.world@lemmy.world
    link
    fedilink
    arrow-up
    6
    ·
    1 year ago

    I’m just looking at that little blue wire. Makes locating it before they pull cables actually possible. So much of this type of stuff in my area can’t be located using conventional methods.

      • Flaky_Fish69@kbin.social
        link
        fedilink
        arrow-up
        5
        ·
        1 year ago

        was at a facility that was installing a network for a new build out- I don’t know how many cables were pulled, but they were pulling them twenty at a time, and the final bundle going to the network switching room was… uh… about the size of an enclosed slide in diameter…

        … the guy at the box side, whose job was to label and cut was only doing the pull-side labels. They ended up loosing about two weeks on that project.

  • PM_me_your_vagina_thanks@kbin.social
    link
    fedilink
    arrow-up
    5
    ·
    1 year ago

    I fuckin’ love fibre. Gigabit internet is a game changer (literally; I uninstall and download games so quick it’s insane, even 100GB+ games aren’t daunting any more).

  • SnowGlobal@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    How many fiber cables do they put in each one of those ducts? There’s 15 ducts and let’s say 5 cables each, 75 fiber lines is a ton of bandwidth!! Lots of room for expansion there.

    • tortoise@vlemmy.net
      link
      fedilink
      arrow-up
      5
      ·
      edit-2
      1 year ago

      I did this for work a few years ago in New Zealand and they run them through neighbourhoods with enough for each house and spare ones for errors and expansion. Particularly in commercial areas because some businesses need multiple lines.

      The fibre itself is a piece of glass the size of a strand of hair with infrared shot down it, but with the casing it looks similar to that small blue one poking out there. Can’t remember exactly how many but that’s the size of a single line so you can fit a lot of them.

      • dixius99@lemmy.worldOP
        link
        fedilink
        arrow-up
        4
        ·
        1 year ago

        When they installed it to my house, they left some of the bare fibre lying on the ground. It’s a little thicker than the fibre you see in those “fibre optic flower lamps”, but not by much. If I’m not mistaken, the blue wire you see in the picture is to help detect the cable after it’s buried.

        • tortoise@vlemmy.net
          link
          fedilink
          arrow-up
          4
          ·
          1 year ago

          Good catch, that’s exactly what that is. Just to clarify my Job was to take it from the boundary of the property and finish the connection so I’m not super knowledgeable on those main lines but the fibre shot through them to us was about the size of that blue wire. There’s also a type that goes along phone lines instead of underground and that’s a thick black one with Kevlar in it.

      • SnowGlobal@lemmy.world
        link
        fedilink
        arrow-up
        4
        ·
        1 year ago

        Wow ok the fiber line that runs into my house is way more shielded and bulked up than that little blue one, so my estimate was wayyyy off. So yeah hundreds of strands could fit in there. How often do they put a switch in neighborhoods? Maybe less often than I thought!

        • tortoise@vlemmy.net
          link
          fedilink
          arrow-up
          4
          ·
          1 year ago

          They run through boxes dug into the ground and that’s where a connection is made using electrical arcs to weld the two ends of glass together and keep them housed. Then the business end tends to go to a telecom building either directly if it’s a small town or through their current system the copper was on.

          It’s been a few years I’m a little sketchy on the details obviously lol but thought I might as well jump in the discussion.

          • SnowGlobal@lemmy.world
            link
            fedilink
            arrow-up
            5
            ·
            1 year ago

            Right on, thanks for the info! I consider this a moment of great success for young Lemmy- on r/ regardless of the topic there always seemed to be someone with experience who would show up and share some of their knowledge. And this feels like the same thing here in a fiber cable laying thread. Cheers!

            • tortoise@vlemmy.net
              link
              fedilink
              arrow-up
              1
              ·
              1 year ago

              They’re used to be; now it’s just puns and jokes for the most part. I loved that about reddit and I hope Lemmy thrives in this way too

  • Aer@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    1 year ago

    It reminds me of a diagram of the insides of a human bone. Pretty metal, ngl