That may well be the case that this is what he means, but how would we know when he calls it tilt shift anyway? Cause that’s not what “tilt shift” means.

If he wants to say it’s photoshopped or whatever, just say that instead of using terms that clearly don’t apply.

There is no tilt shifting in that photo. Neither physical (by actually tilting a single lens inside the lens assembly) nor digital. What you’re seeing as blurryness is just normal how camera focus works.

They may have applied a slight vignette blur to the edges, but it’s really hard to tell with the light bleed on the left edge.

But that’s my point. They didn’t change. In decades. Did your even read the OP?

What else do you want from that email? You got a new subscriber. There’s their name. Why change the layout just for the sake of change? Surely there are people having rules or automations tied to them, why brake them? Just for funsies?

Another name, depending on the exact context, is “hairpin NAT”. Should make googling with the specific router OP has easier.

I had one broken spoke in around 40 years of cycling. I always thought it was basically impossible to break them, even if the bike is 20+ years old. I guess you just need the right (wrong?) circumstances…

One small addendum/correction: I meant Stealth changer (which is based on Tap changer), but got the names confused.

Oh I’m tired, so I should sleep? Phew, so glad I had this guide to help me figure that out, never would’ve occurred to me. 🙄

Because they don’t want you to host things at your house, even though that’s perfectly fine from a technical standpoint. They might want to sell you a “business” line for this, or they just don’t want the traffic (since at least in my area, traffic is always included in any home Internet connection).

I know this post is quite a few days old already, but I still wanted to add a bit to the discussion.

The printers you list vary wildly. Both in terms of design goals (“what is the printer meant to do well”) and assembly requirement (from “ready to print in 10 minutes” to “you build this for like a week until something moves”). A Qidi is basically ready to go, a Prusa will take some time to put together (how much depends on if you got it as a kit or fully assembled). A Voron 2.4 takes about a week to build just for the printer, not including ERCF and/or tool changer, let alone tuning of said ERCF/tool changer.

Also there’s the Troodon, which is a Formbot prebuilt that is closer to a real Voron 2.4 than a Sovol SV08, just to add to your list. It has a stock stealthburner tool head compared to the proprietary thing that Sovol uses, for example.

I’ve recently built a Voron 2.4r2 (Formbot kit) and loved it, but it was like my 4th printer (and a previous printer was a self-sourced scratch build). So do you have experience with 3d printers, and building them or tinkering with them? I would probably not recommend building one otherwise, but it’s not impossible either, just expect a relatively steep learning curve if you have no prior experience.

Do you want to mostly just print in colors but same filament ype, or do you want to mainly have multi-material capabilities? So do you need 5+, or would 2 colors with the option to expand work for you?

If the Voron is a real option for you, I’d highly recommend it. Just make sure you’re going with a can-bus based build/kit (like Formbot). These days I wouldn’t go with an ERCF due to the complexity of building it and then setting it up, as tuning is supposedly a bit of a process. Also you mentioned that the amount of waste during multi-color prints is a real factor for you, and that puts single-nozzle systems inherently at a disadvantage as you just have to purge the hotend on every change. So I would suggest a tool changing system, and I would either start with that (but just 2 tool heads), or add it as the first project. Specifically, I would suggest using the Tapchanger as a modern system. Frankly adding a tool head like that is much less effort than building an ERCF, but also just adds 1 filament each and not like 9 at once.

Yea imagine this was a video of soldiers of some state murdering people. Same argument. You still agree? Also a video of one (or more) stabbings.

Portugal was understandably like “nah fuck you guys”. Still like a bit lonely on a map though.

That actually might be it. And it fits the theme of 42 well.

Yes the bright one I mean is very easily at or around 40. 31 is rather far away.

What’s with 7942 being lit up like the North Star?

There are a couple other curious ones like that, too.

Just to comment on your first point, while in Utopia it wouldn’t be worth mentioning, the fact that not every companys job listing even includes home office, that makes it not just worth mentioning, but means it needs to be highlighted. People look for jobs that allow some or full time home office (for whatever reasons, or in general). How are they supposed to find them if it’s not mentioned anywhere?

What about the back of the bike isn’t “a specific seat” to you? It has foot rests, and typically on bikes of that type you can add retention stuff for smaller kids.

Spotify can actually do that, but it’s a bit cumbersome: as the local songs to a playlist on a PC. Then set that playlist to be downloaded on the phone, and it will download the files directly from the PC as long as they are on the same network.

Heroic also supports Amazon games, doesn’t it?

If it’s always the same users, just block them. I’m also exclusively on Mobile and my app (Relay) has a context menu for users where you can block them. So does Voyager. This is part of lemmy, and sever based (your profile blocks that user). Meaning you will not be served his comments or posts, in this client or any other, or on the Web.