I use Plexamp for that, Jellyfin does it too. You can assign libraries per user quite easily.
So for 3 users you might have 4 libraries, one per user then a shared library they all have access to.
poop
I use Plexamp for that, Jellyfin does it too. You can assign libraries per user quite easily.
So for 3 users you might have 4 libraries, one per user then a shared library they all have access to.
I have complete ROM sets for a couple of platforms in my archive, they’re available on SLSK but not a huge amount of bandwidth available.
Sad to see the old giants like Vimms finally being attacked after all these years.
I’m quite fond of One MoЯn Time and No ones MoЯn, actually the whole UnmoЯnables album.
Soulseek has been getting hammered too
the 2.5" size of disks are now mostly direct USB controller disks rather than sata adapters internally.
3.5" disks are still SATA as far as i’ve seen but the actual sku’s of the disks are often the lower grades. like you will get a disk that looks like another good disk but with only 64mb of dram instead of 256 on the one you would buy as a bare internal drive for example so they can end up a bit slower. and warranties are usually void.
Used to be my main source of disks, but these days there are better ways and it is easier to know exactly what you are getting.
Israel making an awful lot of “mistakes” lately…
Are you transcoding?
4mbit per client for 1080 is generally a workable minimum for the average casual watcher if you have H265 compatible clients (and a decent encoder, like a modern intel CPU for example), 6 - 8mbit per client if its H264 only.
Remember that the bitrate to quality curve for live transcoding isn’t as good as a slow, non-real-time encode done the brute force way on a CPU. so if you have a few videos that look great at 4mbit, dont assume your own transcodes will look quite that nice, you’re using a GPU to get it done as quickly as possible, with acceptable quality, not as slowly and carefully as possible for the best compression.
You’re confusing a container format (MKV) with a video codec (AV1)
MKV is just a container like a folder or zip file that contains the video stream (or streams, technically you can have multiple) which could be in H264, H265, AV1 etc etc, along with audio streams, subtitles and many other files that go along, like custom Fonts, Posters, etc etc.
As for the codec itself, AV1 done properly is a very good codec but to be visually lossless it isn’t significantly better than a good H265 encode without doing painfully slow CPU encodes, rather than fast efficient GPU encodes. people that are compressing their entire libraries to AV1 are sacrificing a small amount of quality, and some people are more sensitive to its flaws than others. in my case I try to avoid re-encoding in general. AV1 is also less supported on TVs and Media players, so you run into issues with some devices not playing them at all, or having to use CPU decoding.
So I still have my media in mostly untouched original formats, some of my old movie archives and things that aren’t critical like daily shows are H265 encoded for a bit of space saving without risking compatibility issues. Most of my important media and movies are not re-encoded at all, if I rip a bluray I store the video stream that was on the disk untouched.
One of my miniPCs is just a little N95 and it can easily transcode 4K HDR to 1080p (HDR or tonemapped SDR) to a couple of clients, and with excellent image quality. You could build a nice little server with a modern i3 and 16gigs of ram and it would smash through 4 or 5 high bitrate 4K HDR transcodes just fine.
Is that one transcoding client local to you? or are you trying to stream over the web? if it’s local, put some of the budget to a new player for that screen perhaps?
I’ve had good luck with WD Blue NVME (SN550)
I’ve put several of those into machines at work and have had years without an issue. I’m also running a WD Blue SN550 1TB in my server as one of the caches, 25000 hours power on time, >100TB written, temperatures way higher than they should be and still over 93% health remaining according to smart.
Sonarr/Radarr etc make it very easy and safe for media, but apps and games would be more of a serious sit down and talk kind of situation as more can go wrong there.
Soulseek is more like an old school peer to peer network like kazaa, limewire, winmx, ed2k etc.
I haven’t seen any clients with a playlist downloader, though that sounds like a cool feature to suggest.
You don’t have to seed.
Morrowind, RCT2, Total Annihilation with all my mods and Deadlock 2 as well if I have time.
Prowlarr is good because it combines usenet indexers and torrents. Makes it very easy to search for anything and compare versions/sources.
Gets even weirder when you see LGs webOS kinda started out as PalmOS
I have seen some talk over on XDA forums, but since there is more to an android TV than just the basic android OS, it’s a bit trickier without risking losing licences/compatibility/DRM/features.
Some older LG webOS tvs can be rooted and custom apps installed too such as ad free youtube players etc.
Not sure if there’s a list, but most Android based TVs can be cleaned and modded to some degree via ADB. If you can access the dev settings in android, chances are you can do a lot to make it better, strip out some google or branded packages, replace the launcher to block OS level ads etc. Projectivy usually works well since it supports input switching on many devices, but it’s still better to do all of this to a separate box and then plug it into a TV that is firewalled/filtered/offline. more control and less to fuck up.
Rooting and unlocking bootloaders is more complex as these android devices dont have normal recovery systems and require a lot of custom drivers to make the video and audio processing work, so it’s not worth going that far.
LCDs do tend to speak somewhat standardised languages, but there is a lot more to a modern TV than just an LCD controller.
Color and white balance calibration, image/motion processing, HDR Processing, backlight control/dimming zones, input management, audio decoding/encoding/passthrough, digitizing analogue sources, HDMI licencing, Dolby licencing, etc.
If you want a better smart TV the best thing to do is to get a hackable TV like most android based models, replace the launcher, strip out system apps and telemetry with ADB and start fresh, then either leave it offline or use filtering to only allow access to the services you approve.
I cant say I care as much as I used to, since encoding has gotten quite good, but I have also gotten better at seeing (aka. worse at being distracted by) compression artifacts so while I am less of a perfect remux rip supremacist, I’m also more sensitive to bad encodes so its a double edged sword.
I still seek out the highest quality versions of things that I personally care about, but I don’t seek those out for absolutely everything like I used to. I recently saved 12TB running a slight compression pass on my non-4k movie library, turning (for example) a 30gb 1080p Bluray Remux into a 20gb H265 high bitrate encode, which made more room for more full fat 4K bluray files for things I care about, and the few 1080p full remuxes I want to keep for rarities and things that arent as good from the 4k releases or the ones where the 4k release was drastically different (like the LOTR 4k’s having poor dynamic range and the colours being changed for the Matrix etc), which I may encode in the future to save more space again. I know I can compress an 80gb UHD bluray file down to 60gb with zero noticeable loss, thats as far as I need to go, I don’t need to go down to 10gigs like some release groups try to do, and at that level of compression you might as well be at 1080p.
I cant go as low as a low bitrate 720p movie these days as I’m very close to a large screen so they tend to look quite poor, soft edges, banded gradients, motion artifacts, poor sound etc. but if I were on a smaller screen or watching movies on a phone like I used to, I probably wouldn’t care as much.
Another side to my choice to compress is that I have about 10 active Plex clients at the moment and previously they were mostly getting transcoded feeds (mostly from remux sources) but now most of them are getting a better quality encode (slow CPU encode VS fast GPU stream) direct to their screens, so while I’ve compressed a decent chunk of the library, my clients are getting better quality feeds from it.