The others are right. Trying to stream from a torrent seems wasteful and complex.

But if you must for some strange reason, perhaps it would work to use webtor.io to produce an http-reachable audio file which could be curl/wget-fetched and piped to an audio decoder/player. I doubt you could make webtor fetch pieces linearly from the beginning. You would likely have to wait until the last piece is fetched to start streaming.

I’ve not fetched subtitles in a while but back when I did, I recall all the websites hosting them were extremely protectionist… more so than any other category of content on the web.

Of course the fix is to have torrents for the subtitle collections, perhaps by language.

Hopefully he asks you to audit a tool you might enjoy using or contributing to.

Sounds good… will be interesting to see if @scratchandgame@lemmy.ml takes you up on the offer!

lemmy.ml (formerly dev.lemmy.ml) was centralized by Cloudflare (after the renaming iirc). It was an embarrassment that the flagship instance was so antithetical to Fedi philosophy. Perhaps due to that well-placed criticism, lemmy.ml eventually dropped CF. But lemmy.ml is still today centralized by disproportionate size. There is also copious political baggage with those admins which has helped drive people off (thus beneficial shrinkage) but which ultimately enabled/led lemmy.world to become the biggest most centralized instance (which is centralized by both factors: Cloudflare and disproportionate size).

In the big scheme of things, AFAICT beehaw is federated and reachable from other Fedi-principles-respecting instances. I can reach it from other non-walled-garden instances I listed. Grouping beehaw with the walled garden instances is a weird place to draw a line. I’ve only heard about beehaw defederating from instances that are antithetical to the fediverse spirit. But I only know w.r.t the big instances… feel free to point out counter examples. There probably wouldn’t be much chatter about defederation from small instances.

The biggest problem is self-contradiction. These two statements are incompatible:

• “This [auditing] is NOT the most important benefit.”
• “‘open source’ is good, firstly, because it permits auditing the source code”

@loudWaterHombre@lemmy.dbzer0.com or @loudWaterEnjoyer@lemmy.dbzer0.com can audit for you.

Seriously, that’s what you’re missing. Bob the non-coder can trust Microsoft not to plant spyware in MS products, or Bob can trust some portion of the public (limited to ~8 billion people) to audit the code. It’s easier to trust the public than it is to trust a corporation. It’s not just about quantity of eyes, but having eyes that are more aligned with your interests.

When I first read this, I thought you were referring to threads in the generic sense – that your instance was blocking specific discussions. You should have capitalized Threads™, and ideally have the TM.

Wow… Fuck #Facebook for hi-jacking a common word. We really need to replace FB Threads™ with an unambiguous word that does not fuck up conversation.

Perhaps, but your reasoning is a bit too vague to be convincing. So what am I missing? Beehaw registration is open. I had no problem getting an account there; over Tor in fact. I don’t recall if they were using the Q/A interview field back when I signed up. OTOH that screening mechanism has become quite typical these days.

W.r.t defederation, I only know that Beehaw defederated from centralized instances, which is fair enough from the PoV of those embracing the decentralization principle. I skimmed through their several page long policies which boil down to “don’t be mean”. So I would guess they defederate from hate-rich nodes - not sure. What specifically do you have in mind?

The Cloudflare instances I listed are walled gardens because they restrict access hard and fast to various demographics with arbitrary exclusion of various groups of people (which IMO is an even harsher form of walled garden than some of the corporate walled gardens). I would not call having a code of conduct indicative of a walled garden, otherwise we would be calling just about every single instance a walled garden and thus not a useful place to draw a line.

If you oppose tech giants, then of course these Cloudflare instances are unsuitable and should be avoided:

• lemmy.world ← Cloudflare
• sh.itjust.works ← Cloudflare
• zerobytes.monster ← Cloudflare
• lemmy.ca ← Cloudflare
• lemm.ee ← Cloudflare
• programming.dev ← Cloudflare
• lemmy.zip ← Cloudflare

This has nothing to do with your question about blocked threads, but I gather that you want to avoid the enshitification brought by tech giants, and you are on lemmy.zip. Cloudflare is a walled-garden and exclusive club. Not everyone can access Cloudflare-jailed content. CF also sees your username and password. So I suggest choosing an instance other than the above, and favoring communities that are also not on those instances.

Some free-world non-walled-garden instances are:

• fedia.io
• sopuli.xyz
• beehaw.org
• infosec.pub
• lemmy.dbzer0.com
• slrpnk.net
• links.hackliberty.org
• mander.xyz

It basically is saying that if you have more money then you have more “votes”.

That’s simply true. It doesn’t do anyone any good to disregard the facts.

Or to put it in another way: If you have more money you matter more.

That abstraction doesn’t help much. And first of all, it’s more accurate to derive the statement “If you have more money then you have more influence”.

It’s still a shitty status quo, but it is what it is. The worse thing you can do is tell people not to boycott shit products on the basis of rejecting reality. It’d be like telling people not to vote in elections because their vote is a drop in the ocean.

Some people vote for democrats, then they cancel their own vote by getting their internet service from Spectrum, buying fuel from Chevron for their car, shipping their packages using FedEx, getting their phone service from AT&T, banking at PNC Bank, flying on Boeing planes, shopping on Amazon, doing their web searches on a Microsoft syndicate’s site (e.g. DDG), buying Sony devices… etc. They either have no clue that most of their voting is actually for the republicans, or they think that drop-in-the-ocean vote that comes once in 4 years somehow carries more weight than the daily votes they cast with reckless disregard.

Greg Abbott’s war chest is mostly fed by oil companies. If you buy fuel for a car, you help Greg Abbott and other republicans. And if you buy from Chevron, you give the greatest support to republicans (Chevron is an ALEC member).

You might let her know that she can borrow DVDs from the public library at no cost. Another little-known gratis option is freesat and terrestrial broadcast. I recently started using MythTV as a PVR to record broadcast TV and was pleasantly surprised to find no commercial interruptions (but if there are commercials in her region, MythTV can cut them out).

I didn’t see the OP’s pic but these groups generally work against enshitification of the world:

• !asshole_crappy_design@slrpnk.net
• !activist_investing@lemmy.whynotdrs.org
• !escapebigtech@lemmy.escapebigtech.info
• !cyber_activism@sopuli.xyz
• !netneutrality@sopuli.xyz
• !right_to_unplug@sopuli.xyz
• !buyitforlife@slrpnk.net
• !anticonsumption@sopuli.xyz
• !fightforprivacy@feddit.ch
• !offgrid@slrpnk.net
• !foss@beehaw.net
• !privacy@links.hackliberty.org
• !climate_action_individual@slrpnk.net

Notice that none of those communities are on Cloudflared instances (thus also avoid propagating the enshitified portion of the fedi).

Ending capitalism is not the /only/ way. Within a capitalistic system, you can boycott shit. Most consumers are pushovers but it doesn’t have to be that way. I’m boycotting hundreds of shitty companies. Off the top of my head:

• Amazon
• Cloudflare
• Microsoft
• Facebook
• Google
• Apple
• (surveillance advertisers in general)
• (all closed-source s/w)
• HP
• Proctor & Gamble
• Unilever
• all ALEC members (American Express, Anheuser Busch, Boeing, CenturyLink, Charter Communications, Chevron, FedEx, Motorola, PNC bank, Sony, TimeWarner)
• many shitty banks
• Paypal
• AT&T
• GMA members (Coke, Pepsi, Kraft - Heinz, Kellogg’s, General Mills, McCormick, Hormel, Smucker)
• BetterThanCashAlliance.org members (visa, mastercard, unilever) – war on cash
• Bayar-Monsanto
• Dupont
• Hershey
• Nestlé
• Exxon/Mobil
• Comcast
• Koch
• Home Depot
• Lowes
• …etc

Those are all shitty companies that significantly worsen the world. Giving money or data to any of them contributes to enshitification of the world.

Of course it’s an option to stop supporting assholes. Become ethical. Be the change you want to see.

I appreciate the tip. The shank was ½ a bicycle axle bolt with non-standard threading. I could not have switched to a standard bolt because the nuts that interface to ball bearings needed to be on the bolt.

Good to hear your anchors held up over 10 years. Someone else just mentioned they’ve not bee so lucky: https://lemmy.dbzer0.com/comment/5372639 I suppose it’s important that they be used in a dry climate.

That’s good to know. I would hope a metal anchor to reshape when temp causes expansion. It’s a shame to hear it’s the brick that’s forced to expand. In my case it’s a solid metal rod, so it sounds like the metal is guaranteed to split the brick in a temp change.

It sounds like I have to pull out the shank, bore the hole to 10mm, and either use chemical anchor or fasten it using a sheet metal w/2 nuts.

Is this a friction anchor?

https://lemmy.dbzer0.com/pictrs/image/f504ebc8-a015-4b7a-907d-85eabdfc260a.webp

I just learned these exist from the other thread. Though I doubt it would have helped in my case. At this point I’ll just have to check it over the seasons and see if temp changes have caused any issues.

I was mainly asking for future reference whether I should repeat what I did or not. I suppose it’s rare that a smooth rod needs to be installed on brick.

EDIT: looks like the link died due to the comment containing that image being deleted. Sorry about that.

Both… functional art.

The original problem is that there was a water shut-off valve for the whole floor in the shower. Very ugly to have a valve in the corner on the floor and somewhat in the path of the water if someone were to point the showerhead slightly outside the pan. The valve handle was rusting. It was embedded in a solid block of concrete with the handle sticking out. The valve started to fail (did not completely shut off the water). And it was the kind of valve where the whole valve needed to be replaced. Terrible work by the builders. I had to demolish the concrete to reach the valve.

So I replaced the valve with the kind of valve that has a replaceable cartridge. But I also refused to embed it in concrete again. I will build a removable sealed box around it. But the box could not be both waterproof and also easily removable on the fly whenever the valve needs to be accessed. So I put a hole in the wall (shower to bedroom). Then I attached a 90° gearbox drill accessory and a shaft to that goes through the wall. On the bedroom side, I could have just put a handle. But I found a wood helm to a ship (miniaturized). I thought that would be the perfect steampunkish valve handle. But it did not clear the wall (in a corner). So i got carried away and put a bicycle sprocket on the shaft, and mounted the helm to another sprocket, which i attached to the wall higher up. And wrapped a chain between them.

I could not pull it out with my hands after tapping it in. But to be clear, there’s only a sheer force to deal with, and it’s light.

I cut a bicycle axle bolt in half, and embedded it in the brick so there is a bicycle sprocket on the wall. Then a chain wraps another sprocket, which turns a shaft that goes all the way though the wall to the other side, where it connects to a right-angle gearbox, which attaches to a water valve. It’s lightweight overall… just the weight of a sprocket, chain, and a small decorative wood thing out of wood to serve as a handle.

This might come a bit too late but why didn’t you just get threaded rod and use one of these instead?

I did not know anchors like that existed for machine bolts. That’s good to know! However, it would not have helped in this situation. The bicycle axle has non-standard threading (~9mm bolt with a thread pitch that’s 2 steps away from the norm). Since it had a special nut that interfaced to ball bearings, I could not bring in a standard bolt or threaded rod. And the threaded portion of the axle was short enough that no threads could have gone into the wall. I could have added threads to the bare portion, but my die set skips the ø=9mm size.

I was asking more for future reference – whether or not I should ever repeat this. And I think you answered that. Even if I get lucky in the future on getting a perfect fit at that moment, temp changes could blow it. I guess I’ll assume anchors (chemical and mechanical) are designed to handle the temp changes.

Old red brick, which is solid. It’s light duty, and unusual. I cut a bicycle axle bolt in half, and embedded it in the brick so there is a bicycle sprocket on the wall. Then a chain runs to another sprocket, which turns a shaft that goes all the way though the wall to the other side, where it connects to a right-angle gearbox, which attaches to a water valve. But it’s lightweight overall… just the weight of a sprocket, chain, and a small decorative wood thing out of wood to serve as a handle. I suppose you’re sorry you asked at this point.