How about just having a button on a fob/phone which initiates comms, like in the good old days. You can’t relay the signal if there isn’t one till you press the button. But that isn’t sexy and it’s too similar to traditional cars, so they won’t do it.
Any PC that has virtualization features can be used. Unless it’s very old, I’d say it’s supported. But it may not be enabled in the bios by default. It’s called VT-x for Intel and AMD-v for AMD, I think. But both are supported for at least 10 years on almost any PC.
It’s a hypervisor level virtual machine host and you can use it to install multiple os’s on the same machine with little overhead. I’ve been running haos like that for a few months now and I’m super satisfied.
Because you can’t end to end encrypt if you don’t have control over both ends. You’d need to trust the other end. Signal doesn’t and their user base especially doesn’t.
There is indeed multiple ways of doing anything in freecad. But over time, I prefer staying in Part design as much as possible as this makes it more modifiable and customizable and there are plenty of reasons more for me. But in the end - whatever works is good enough.
Shape binder is what you need. Shape binder can be used to reference geometry from another body. What I would do is I’d make one pocket on the main body. Then select another body and make it an active body. Then select the pocket you made (the surface or the edge) and create a shape binder (part design). This will effectively import the selected feature from the first body and you can reference it from second body. Make sure you hide the first body, as it somehow gets in the way of shape binder, for some reason. Repeat for third body.
Yes, flaxseed oil for salads is great. It just takes forever to polymerize. We’re talking weeks, maybe up to a month. But you can still use the cutlery, it will just wear off fast. You can speed it up by boiling it before use, but have to be careful to not burn it or have it go ablaze. I just use it raw and apply it from time to time, eventually it all just blends and I reapply once a year.
Looks like you’re just missing Linux to compete the list. It’s not for everyone yet, though.
Well, it’s not 2024 just yet. And besides that, I don’t think it’s possible to completely control everything that gets imported, but I reckon it’s going to be a rather rare occurrence in the future.
It’s often about the money, yes. But highly sought after engineers who can choose where they want to work probably have other criteria too, like not getting stuck in MS corporate ladder long term. That being said, money compensates for a lot of things, that’s just the world we live in.
Yes, for one device, I’d do wifi too. ZigBee does add complexity, but it also adds many possibilities. Esphome is a good solution, I use it also. In fact it seemlessly integrates with HA, so it doesn’t matter
One of the bigger reasons is ZigBee is capable of mesh network forming, which is useful if you want more devices to be smart. It’s also low power. And the devices are in their private network isolated from the internet, which is also a desirable quality. In summary, ZigBee is built for smart devices, whereas wifi not so much.
This is great! I’ve only recently discovered jq and was thrilled to have it after bashing my head in bash for a couple of days. I replaced the whole operation with a single line. This tutorial is just what I need. I like that it’s interactive and has neatly grouped examples! Bookmarking it, as I’ll need it very soon again.
No, you can just install it. The biggest drawback is you can’t easily follow your subscribed channels. There is a way to import the list, but no easy way to update. The rest works great!
If it works for you, don’t touch it, great. Manjaro mostly just works, but occasional headaches I kept getting, like packages being broken for days at a time, no easy place to look for solution (their repo being different to arch’s makes 99%of the difficulty) made me switch to arch/endeavorOs. Eventually, they may get stable enough to be acceptable, but I don’t think their way is the right way to do it and they may even harm or slow down arch development and community in the process. Just looks like arch with extra steps, so I always recommend endeavorOs, Garuda or plain Arch, before Manjaro. But that doesn’t mean Manjaro is trash and in some cases, it may even be the best solution.
Hard to tell From the photo, but might be Ash. If so, it would make a great axe handle. But you can of course make an axe handle out of any hardwood, it will mostly be fine.
This seems like the best option for my country. They are easily available and seem cheaper than Reolink. Do they have free API for all the smart functions as well? Like movement detection etc.
Yes, that’s exactly it. You could try out and see what you prefer. I tried everything, but also tastes change over time. I used to use KDE cause it felt more like windows (we’re talking XP era), later I tried Gnome, Unity, xfce, fluxbox, but then I tried i3 and it is really minimal and tiling and I don’t need anything more. Not for beginners, but after some time, it might become your jam.
Kinda like that, but a bit more. Those are desktop environments, which differ in more than just styling. Most popular ones are gnome, KDE, xfce, but there are dozens of others. Most distributions come with one directly supported, but you can install others usually and pick at login.
This looks the most promising. I’ll take a closer look. Does it provide a rtsp stream?